Auto Rod Controls  50 Green Street  Wrentham, MA 02093       508-384-1524
This new system allows starting the engine temporarily bypassing
the low oil pressure shutdown feature. When the engine starts it
monitors the required low oil pressure. It waits and if minimum oil
pressure is not reached safely it will shut the engine off. If the
pressure is correct the engine will continue to run through the oil
pressure switch closure. This overrides the ignition switch on power,
enabling it to shut the engine off with the ignition switch still on. The
ignition switch simultaneously also retains the ability to shut the
engine off. With this control the oil pressure switch never switches
any high currents which assures its longevity while still maintaining a
40 amp capacity ignition circuit.

Our units manual override switch is provided to bypass and/or test
the engine oil pressure switch. By automatically monitoring the
startup oil pressure rise makes it unnecessary  to crank the motor
excessively with the ignition off in an attempt to obtain enough oil
pressure to close the switch and allow the car to start. This
procedure only drains the battery, overheats the starter and tends to
flood the motor and wash the rings.

The unit works with any two pin normally opened contact oil pressure
Model 3000
Low Oil Pressure Control
This is a stand alone system that
will work in any car.
This unit has the ability to shut
both ignition and Nitrous
systems down at low oil pressure
New products as of September 20, 2019 - To view
entire catalog return to Home page